|
|
|
Voyager Moto-GPS Computer Protectors for Motorcycles and ATV |
Cost/Add To Cart |
|
 |
Voyager Triple Clamp Protector
Front - Black/Orange/Blue/Red
Triple clamp mounting bracket. Mount Voyager to front of triple clamp of most offroad motorcycles.
(Computer sold separately)
KTM EXC/MXC/SX/SXF/XC/XCF/XCW/XCFW/EXCR/EXCG
125/144/150/200/250/300/400/450/520/525/530 1998-2012
Husaberg FE/FX/TE 250/300/390/400/450/570
2005-12
 External
antenna included |
|
| |
Fits most KTMs and other motorcycles where
the number plate screws into the front of the triple clamp. If a
headlight or number plate spacer is present, there should be
plenty of room. On some models with a very close number plate,
some modifications may be necessary (add spacer or notch the
number plate.) |
|
 |
Voyager Triple Clamp Protector
Top - Black/Orange/Blue/Red
Triple clamp mounting bracket. Mount Voyager to top of triple clamp of most offroad motorcycles.
Fit bikes with 90mm to 106mm width handlebar bolt spacing.
(Computer sold separately)
YZ/YZF, CR/CRF, RM/RM-Z, KX/KXF 125/250/450/500
1995-2012
External
antenna included |
|
| |
Bolts between the lower bar clamps and triple
clamp plate with 100-106mm bolt spacing. It is useful for most
Honda (and other) motorcycles, although some aftermarket
additions may cause fitment issues. |
|
 |
Voyager Steering Column
Mount - Black/Orange/Blue/Red
Voyager steering column mount for UTV. Fits steering columns with a 1.5" diameter column.
Bracket is billet aluminum, hard anodized gloss black.
(Computer sold separately)
External
antenna included |
|
|
|
|
 |
Voyager Triple Clamp Mount Bracket Front - TT-025-OEB
Mount Voyager to front of triple clamp of most offroad motorcycles.
KTM EXC/MXC/SX/SXF/XC/XCF/XCW/XCFW/EXCR/EXCG
125/144/150/200/250/300/400/450/520/525/530 1998-2011
Husaberg FE/FX/TE 250/300/390/400/450/570 2005-11
(Computer
sold separately) |
|
| |
Fits most KTMs and other motorcycles where
the number plate screws into the front of the triple clamp. If a
headlight or number plate spacer is present, there should be
plenty of room. On some models with a very close number plate,
some modifications may be necessary (add spacer or notch the
number plate.) |
|
 |
Voyager Triple Clamp Mount Bracket Top - TT-025-OEB6
Triple clamp mounting bracket. Mount Voyager to top of triple clamp of most offroad motorcycles. Fit bikes with 90mm to 106mm width handlebar bolt spacing.
YZ/YZF, CR/CRF, RM/RM-Z, KX/KXF 125/250/450/500 1995-2011
(Computer sold separately) |
|
| |
Bolts between the lower bar clamps and triple
clamp plate with 100-106mm bolt spacing. It is useful for most
Honda (and other) motorcycles, although some aftermarket
additions may cause fitment issues. |
|
 |
Voyager Handlebar Mounting Hardware - TT-9000-1000
Included in every Voyager kit. Fits 1-1/8" - 7/8"
handlebars. Positions Voyager in the center of the controls, in the safe zone below the bars.
(Computer sold separately) |
|
|
 |
Voyager Bracket - Steering Column - TT-025-OEB8
Voyager steering column mount for UTV's. Fits steering columns with a 1.5" diameter column.
Bracket is billet aluminum, hard anodized gloss black.
(Computer sold separately) |
|
|
= Normally ships the same business day
= Ships in 1 to 2 business days
= On backorder from the manufacturer
Voyager
Triple Clamp Protector Front
Black/Orange/Blue/Red (Computer sold separately)
