Adventure Footpegs - Extra Wide
Platform size: 2.25" x 4.75"
This is the ultimate
adventure bike footpeg platform, a whole inch and a half
wider than our best-selling Evolution III footpegs. Each
rail has threaded holes for stainless steel screw cleats
that act as the teeth. Choose how much grip you want by
selecting either the tall 12mm or shorter 10mm screws.
Fastway Adventure footpegs can be mounted in standard or
low
positions, based on rider
preference. Fastway footpegs can be swapped between bikes by
purchasing a different mount kit. The "Fast Kamber Mounting
System" uses shims to adjust the upward or downward tilt of the
pegs. If you want your knees to grip the bike more, add more
shims, raising the outer end of the peg until you get the
desired camber.
Evolution III (F3) Footpegs
Platform size: 2.25" x 3.25"
The Evolution III
footpegs feature Fastway’s patented threaded pin-style
cleats. These footpegs offer sure-footed confidence,
maximum grip, and adjustability. The reversible collar
system allows you to choose from standard height or
"Low-boy" peg height positions, helping you get the best
fit between you and your ride. The Fast Kamber Mounting
System allows you to adjust the upward and downward tilt
of the pegs. If you want your knees to grip the bike
more, add more shims, raising the outer end of the peg
until you get the desired camber.
Pro-Series MC Footpegs
The IMS Pro Series motorcycle footpegs are made from 17-4 cast
stainless steel with a powder coat and polish finish. 2"
by 2.75 in dimension. Patented tooth design with taller teeth on
the outside edge of the peg for better control and riding
performance.
