 |
|
| |
|
|
|
|
|
|
Adventure Footpegs -
Extra Wide
Platform size: 2.25" x 4.75" |
 |
 |
This is the ultimate
adventure bike footpeg platform, a whole inch and a half
wider than our best-selling Evolution III footpegs. Each
rail has threaded holes for stainless steel screw cleats
that act as the teeth. Choose how much grip you want by
selecting either the tall 12mm or shorter 10mm screws,
both included with each peg set. Made in the USA.
Fastway Adventure Footpegs |
|
Fastway Adventure footpegs can be mounted in standard or
low positions, based on rider
preference. Fastway footpegs can be swapped between bikes by
purchasing a different mount kit. The "Fast Kamber Mounting
System" uses shims to adjust the upward or downward tilt of the
pegs. If you want your knees to grip the bike more, add more
shims, raising the outer end of the peg until you get the
desired camber.
Adventure footpegs package includes: Long
12mm F3 threaded cleats, short 10mm F3 threaded cleats,
2 springs, 4 thin shims, and 4 thick shims (Fit kit sold separately) |
|
|
|
 |
Evolution AIR Footpegs -
Super Light
Platform size: 2.25" x 3.25" |
|
 |
The
NEW
Fastway Evolution AIR footpegs are lighter and stronger.
Designed and sculpted out of 7075 billet aluminum, then
hard anodized and laser etched for looks. Features
Fastway’s patented adjustable HEIGHT, TRACTION, and
CAMBER options. Weighing in at a scant .60 pounds per
set, these footpegs are 50% lighter than our stainless
steel Evolution III footpegs, while being the same size.
Made in the USA.
Evo AIR Pegs |
Evolution AIR
footpegs package includes: 24 10mm length
cleats, and 24 12mm length cleats.
(Fit kit sold separately) The F5 serrate pin and F6 serrate
spike cleats are sold separate. |
|
|
|
|
|
Evolution III Footpegs -
Original
Platform size: 2.25" x 3.25" |
|
|
 |
The
Evolution III footpegs feature Fastway’s patented threaded
pin-style cleats. These footpegs offer sure-footed confidence, maximum grip,
and adjustability. The reversible collar system allows you to choose
from standard height or "Low-boy" peg height positions, helping
you get the best fit between you and your ride. The Fast Kamber Mounting
System allows you to adjust the upward and downward tilt of the
pegs. If you want your knees to grip the bike more, add more
shims, raising the outer end of the peg until you get
the desired camber. Fastway Adventure footpegs can be
mounted in standard or low positions (on most bikes),
based on rider preference. |
|
|
|
| |
|
|
|
| |
|
|
